If you are going bonkers because of the Netgear Orbi purple light issue, your worrisome days have come to an end. In this post, we have summed up some troubleshooting hacks that will help you get rid of the purple light issue in the blink of an eye. Continue reading this post.
Why is Your Netgear Orbi Flashing Purple?
You might be facing the Netgear Orbi purple light issue because of various reasons. Some of them have been listed below:
- Loose cable connections
- Improper power supply
- Weak internet connection
- Outdated firmware
- Technical glitches
- WiFi interference
- Router and satellite not connected
Regardless of what might have led you to the Netgear Orbi purple light issue, the below given fixes will tell you how to troubleshoot it.
Fixed: Netgear Orbi Purple Light Issue
- Perform Orbi Firmware Update
To begin with, see if the firmware of your Netgear Orbi router is running on an updated version or not. If it isn’t, update it immediately by following the steps given below:
- Switch on your computer.
- Launch an internet browser.
- In the URL bar of the internet browser, type orbilogin.com.
- Press the Enter key.
- You will find yourself on the Netgear Orbi login page.
- When prompted, fill in the default username and password.
- Click Log In.
- On the main dashboard, head over to the Settings menu.
- Click Maintenance.
- Select Firmware Update.
- Follow the on-screen instructions.
Now, check if the Netgear Orbi purple light issue has been resolved or not. If not, keep reading this post.
- Reboot Your Netgear Orbi
As mentioned above, technical glitches can also force you to experience the Netgear Orbi purple light issue. Therefore, reboot your device to get rid of these glitches.
Here is how you can give your Orbi WiFi router a restart:
- Disconnect your Orbi router from the existing modem.
- Power off your Netgear Orbi and unplug it from its wall socket.
- Hold on your horses.
- Thereafter, plug your device back into its wall outlet.
- Do not forget to reconnect your Netgear Orbi router to the existing modem.
Once you are done rebooting your device, try to access the orbilogin page. Are you still not able to troubleshoot the Netgear Orbi purple light issue?
- Avoid Signal Interference
Change the location of your Netgear Orbi router and make sure that it is kept away from the following transmitting appliances, reflexive surfaces, metal objects, and electronic devices:
- Cordless phones
- Washing machines
- Baby monitors
- Treadmills
- Televisions
- Refrigerators
- Microwave ovens
- Mirrors
- Fish tanks
- Bluetooth speakers
- Aluminum studs
Apart from placing your Netgear Orbi router away from these devices, also ensure that it is put nowhere in corners or near thick concrete walls.
- Check the Ethernet Connection
Verify that the Ethernet cable you have used to connect your Netgear Orbi router to the existing modem is free of damaged or not. If it is, then it is well and good. On the off chance, it isn’t, considering replacing it with a new one.
Don’t want to do that? No problem. Use a wireless source instead to connect your devices.
- Reset Your Netgear Orbi
If even after all the efforts you have made, you are struggling with the Netgear Orbi purple light issue, perform factory default reset. Here’s how:
- Look at all sides of your Orbi device and locate the Reset hole.
- Take an oil pin and carefully press it in the Reset button.
- Wait for a couple of seconds and let your device get restored to the default mode.
Now, perform Netgear Orbi setup from scratch. If you come across the Orbi satellite not connecting to router issue while doing so, bring your devices closer.
To Conclude
This was all about how you can get rid of the Netgear Orbi purple light issue. Here is to hope that the aforementioned tips helped you fix it.
