I have tried everything to fix Netgear router orange light issue but nothing worked. Are these questions boggling your mind too? If so, then walk through this article and learn how to fix Netgear router orange light issue in no time. Continue reading!
Fix: Netgear Router Orange Light Issue
Netgear router orange light issue signifies technical issues with your device. Let’s have a quick glance at the major reasons behind the issue along with their solution.
Outdated Router’s Firmware
Bear in mind – if you keep on avoiding the firmware updates pop-ups of your Netgear WiFi router, you will surely stuck with orange light issue. Therefore, access the Netgear router login page, head towards the router’s settings page, locate and click on firmware update section and check if there is any update available for your device. If you found any, update Netgear router firmware by following the on-screen instructions.
Modem Connectivity Issue
If your modem is not connected to your Netgear router, then you might encounter with the issue. Therefore, ensure that your modem and the router are well connected using an Ethernet cable. To check connectivity between your devices whether it has been successfully established or not, try to access the Netgear router login page.
Improper Netgear Router Setup
Partial or improper Netgear router setup may also lead you experience the orange light issue. In such a case, make sure to configure your Netgear router in a proper manner.
Power Cycle the Router
Still facing Netgear router orange light error? Need not to worry! In that case, you need to restart or power cycle your Netgear router once.
To restart your Netgear router in a proper manner, follow the instructions highlighted below:
- Power on your Netgear router.
- Disconnect the Netgear device from your modem.
- Wait for a few seconds.
- Power up your Netgear router.
- Connect your modem to the Netgear router.
Let us know via comments whether this tip helped you out to fix Netgear router orange light issue or not.
Relocate Your Router
If you have placed your Netgear router away from the reach of your modem, then it is obvious to see orange or amber light on your device. To get it fixed, relocate your Netgear router. Keep the following points in mind while placing your Netgear router:
- Locate your Netgear router at the middle location in your home.
- Keep the router away from neighboring WiFi devices and networks.
- It is also suggested that you place your Netgear router openly. Do not hide it. If you hide your Netgear router, then you won’t be able to get the most out of it.
- Avoid placing the router away from the reach of your modem.
- Lay your queries on us if you need more help/ information regarding placing or relocating your Netgear router.
Still no luck? Don’t panic! Try a couple of fixes outlined underneath and troubleshoot the Netgear router orange light issue from the comfort of your home.
- Your Netgear router must be getting a continuous power supply from the wall outlet.
- The Ethernet cable must be in working condition.
- There shouldn’t be any interference-creating WiFi devices placed near by your Netgear router.
- The correct firmware version must be installed on your Netgear router. To confirm the same, navigate to official site of Netgear.
- Netgear router login credentials that you have used to update your router’s firmware must be correct.
- Ensure that you are using the correct web address, routerlogin net to access the router’s settings page.
- Make sure that there isn’t any issue from your service provider’s end.
Tried everything but nothing worked? It seems like your existing modem is the culprit. In that case, add a Netgear cable modem to the router – cover your house with adequate WiFi signals and get a permanent solution to fix orange light issue.
Was this article helpful? Do share your answer with your fellow readers.
