The Don’ts of Using a Heat Pump

A heat pump installation has become a popular choice for homeowners. Compared to traditional heating systems like a broiler, heat pumps are highly efficient. An average heat pump Auckland can last for about 15–20 years. If maintained and serviced properly, the heat pump can also last for a greater number of years. As an existing owner of a heat pump Auckland, it is necessary to know about the don’ts to add more years to the heat pump and lower the energy consumption.

Here is a complete list of don’ts that will help you make effective use of the heat pump Auckland and optimise its efficiency.

Don’t use the automatic mode

• The auto mode in a heat pump Auckland is not the most optimal and efficient setting.
• Choosing the automatic mode can result in unnecessary switching between heating and cooling.
• A heat pump Auckland runs seamlessly and efficiently when set to the “cool” mode during summer and the “heat” mode in winter.

Don’t use the lowest fan speed

• A heat pump Auckland works better with a higher fan speed setting.
• It is possible that when using a high fan speed setting, ambient noise may be generated.
• It is best to use the highest fan speed that you find comfortable and then put in your preferred temperature setting.

Don’t mess around with the setting every day

• A heat pump Auckland works differently than traditional heating systems.
• It functions more efficiently if constant temperatures are set and maintained without too much fiddling.
• If you have just installed a heat pump at home, you may need a day or two to find the setting that works perfectly for you.
• Once you have found the perfect setting, leave the system with the same setting.
• You can change the setting to a low temperature if you are going out or if no one will be at home for more than 24 hours.

Don’t worry about the temperature reading

• While using a heat pump Auckland, you should be cautious about the thermostat control.
• What you should not be worried or bothered about is the right temperature setting for your home.
• Don’t be too bothered by the temperature reading.
• At first, you can simply set the temperature to a comfortable level.
• Slowly, over the next couple of days, you can experiment with the temperature setting to find out what is right for you and your home.
• Only if there is a significant change in climate should you make changes to the temperature setting.

Don’t skip the heat pump maintenance

• It is important to keep servicing and maintaining the heat pump unit regularly.
• Some of the basic maintenance tasks can be performed by you.
• For more complex maintenance tasks, it is best to seek professional help.
• A professional and expert heat pump technician Auckland can help you replenish the fluid levels and clean out accumulated debris and snow.
• It is recommended that you schedule an appointment with a professional at least once a year for your heat pump Auckland.

Don’t fiddle with the heat pump Auckland on your own

• In the event of any breakdown, it is important to only allow a professional technician to examine the heat pump.
• As a homeowner, you may have only limited knowledge about heat pumps.
• Hence, you must not try and perform DIY repairs to the heat pump Auckland.
• Trying to repair the system on your own may also make the warranty null and void.
• Paying a heat pump technician for a single visit or an annual inspection contract is much cheaper than fiddling with the heat pump on your own.

To enhance the energy efficiency of the system and increase its life expectancy, it is important to strictly not indulge in any of these don’ts while using a heat pump. If the heat pump works at its maximum efficiency, you can get the most out of it. For proper maintenance, servicing, and repairing of the heat pump Auckland, get in touch with Reliance Ventilation Systems (RVS) today.