So, looking to set up the TP link WiFi extender? Well, that’s good! Because after performing TP link WiFi extender setup correctly, you will be able to get uninterrupted internet access on all your connected devices without signal drop. But what’s this? TP Link WiFi extender won’t connect to the internet! Need not to worry! In this troubleshooting guide, we will make you aware with all the possible solutions that will help you fix TP Link WiFi extender won’t connect to the internet issue in haste. Let’s take the plunge!
Here’s how to fix TP link WiFi extender won’t connect to the internet issue.
Power Cycle Your TP link Extender
First and foremost, power cycle your TP link WiFi extender. To initiate the power cycle process, disconnect all the devices that are connected to your TP link WiFi extender and then unplug it from the power outlet. After that, you need to wait for few minutes because it takes some time for working. Then, plug your TP link WiFi extender back into a working wall outlet and power it on. Wait for the extender’s power LED to become stable. Connect your WiFi-enabled devices to the extended WiFi and enjoy streaming videos to the fullest.
Check all the Ethernet Connections
The next step in our post to get rid of TP link WiFi extender not connecting to the internet issue is to check all the wired connections. Check the Ethernet cable that came along with your TP linkWiFi extender. It should be well working.
In the event that you found any sort of cuts or damages in the Ethernet cable, replace it right away.
- After replacing the Ethernet cable, connect your TP linkWiFi extender to your main router.
- Make sure that the Ethernet connection between the TP link WiFi extender and your router is strong and secure enough. The Cable you are using to connect the extender and your router must be well-working and well-maintained.
- Once you’re done, launch an internet browser of your choice on a PC or laptop, and try to access the TP link extender login page using 192.168. 1.1 IP address. It is also very important that you need to check that your web browser is updated or not becuase the reason being, the extender’s IP address do not work on an outdated browser.
Just in case, the IP address is not working for you, it is suggested to use the TP link WiFi extender default web address instead.
Update Extender’s Firmware
Obsolete firmware version on your TP link WiFi extender may also result in the non-working of the device. So, to make the most out of your TP link WiFi extender, navigate to its official site – follow the on-screen instructions and update the firmware of the device to the latest version (if available).
The firmware of your device can also be updated by navigating to its settings page using the default TP link extender login details and going through the on-screen instructions.
Check the Power Supply
Your TP link WiFi extender must receive a continuous and fluctuation-free power supply from its respective wall outlet. Besides, verify that the wall plug you are using is not damaged or short-circuited.
Configure Your TP Link Extender Properly
Be sure that you have completed the TP link WiFi extender setup in a proper manner. Bear in mind – a partial or incomplete TP link WiFi extender setup process may give you connectivity issues. So, to get the most out of your internet connection, configure your TP link WiFi extender properly.
Wondering how to set up your TP link WiFi extender? Not anymore! Without much delay – leave all your extender-related queries into the comments section.
Endnote
That’s all! Here ends the list of our TP link troubleshooting tips to get rid of WiFi extender not connecting to the internet issue. If you get stuck at any step, please feel free to share your feedback with us. Apart from this, if you need more assistance regarding the same – without delay – let’s know via comments.
